LP36 RIDE-ON TROWEL

Powerful. Easy to use. Ergonomic. Balanced. Ready to grind and polish at incredible rates.

Engine: Kawasaki FX1000V, 999cc
Engine Power: 35 hp / 26 kW
Fuel Minder: yes
Rotor RPM: 0-185
Engine RPM: 2000-3600
Path Width: 80in / 2032mm
Pan Diameter: 2 x 36in / 915mm
Tool Holders per Pan: 4 x 10.63in / 270mm or 4 x 14in / 355mm
Blades per Rotor: 4
Weight: 1389 lbs / 630 kg

Machine Features:

• - Equipped with two 36-inch floating pans with four Trowel Shine Tools Holders on each pan.
• - Powerful Kawasaki FX1000V engine with Lavina Fuel Minder for closed loop fuel management and optimal performance.
• - Heavy-duty shroud protects walls from slurry.
• - Integrated wheel set lifts the trowel (200mm) for changing blades and tools quickly and easily.
• - Continuously variable transmission provides superior performance by continually adjusting the drive ratio to obtain optimum torque and speed during all phases of finishing from low speed high torque to high speed burnishing.
• - LED lighting for better visibility.

DIAMOND TOOLING FOR LP36

Evaluate the floor before selecting the diamond tooling - consider the concrete hardness, condition of the concrete, desired finish, etc. This is a wet process - a proper slurry management method should be used. We recommend using the SLURRY MONSTER system for slurry management.

During the first steps - metal or hybrid ( up to 200 grit), for optimal tool performance you can use Consolideck First Cut. Consolideck First Cut lifts concrete slurry solids away from the surface, suspends them, and clears the path for the diamonds, which increases efficiency and reduces clean up time between steps.

DAMAGED CONCRETE & RAIN DROP EFFECT

If grinding is neccessary, start with the SA-MB metal bond grinding discs - 3-inch pucks, with velcro-backing, offered in 46/70/120 grit.
Use 3 or 4 pcs on 10.63" holders and 5 pcs on 14" holders.

THE WAFFEL STYLE DIAMOND PADS

offered in full grit range from 50 grit to 3500 grit

OPTIONAL POLISHING STEPS

For maximum shine, continue with 1800 & 3500 grit V-Harr premium polishing pads or ShinePro pads.
Apply a concrete sealer after 3500 grit, if needed, and burnish the floor with ShinePro BUFF pad.